Dacor EWO Especificações descarregar pdf (Página 9)

VERIFYING THE PACKAGE CONTENTS

• Use and care manual

• Mounting screws

• Wire rack with mounting hardware (IOWO model only)

REMOVING THE DRAWER

INSTALLING THE CHASSIS

Remove the drawer from the appliance to allow access

to the mounting holes during installation, and to reduce

weight:

1. Pull the drawer out to the fully open position.

2. Push in on the locking tab on one side as you pull the

drawer up.

3. When the drawer comes loose on the slide, repeat the

same process on the opposite side.

4. Grip the drawer on both sides and pull it free.

5. For safety, push both drawer slides into the drawer

opening.

STEP 2: Push

locking tab

1. Grasp the warming oven chassis on opposite sides and

slide it partially into the cabinet opening.

2. Temporarily support the oven in place so that it will not

tilt or fall.

3. From an adjoining cabinet, reach in behind the oven

and pull the power cord until the plug is next to the

electrical outlet. Do not plug in the power cord at this

time.

4. After positioning the power cord and plug, slide the

chassis completely into the cabinet until the front frame

is positioned flush against the cabinet face.

5. Use the screws provided to secure the warming oven

chassis to the cabinet and support platform, (You may

want to drill pilot holes prior to installing the mounting

screws.) Install one mounting screw through the hole

provided in the front. A pair of holes go through the side

of the chassis for mounting to the cabinet walls.

continued...

STEP 3: Pull up on

front of drawer

Drawer Slide

dacar 7

1 2 3 4 5 6 7 8 9 10 11

Sem comentários

Dacor EWO Especificações Página 9